歡迎訪問上海峰志儀器有限公司官網!
上海峰志儀器有限公司shanghai fengzhi instrument co,.ltd
全國咨詢熱線:13818683556
您的位置:首頁>>無損檢測資訊>>行業動態

瑞典蘭寶紫外線探傷燈免費演示活動

作者:labino 時間:2024-06-12 13:37:00瀏覽371 次

信息摘要:

上海峰志儀器有限公司專業代理瑞典蘭寶(labino)生產的PS135 HID紫外線探傷燈、labino bigbeam、labino midbeamled黑光燈、UVG3、UVG2紫外線手電筒。現針對上海地區的客戶提供上門演示活動,如果有興趣了解瑞典蘭寶(labino)的紫外線產品,請和上海峰志儀器有限公司聯系。

瑞典蘭寶紫外線探傷燈免費演示活動

上海峰志儀器有限公司專業代理瑞典蘭寶(labino)生產的PS135 HID紫外線探傷燈、labino bigbeam、labino midbeamled黑光燈、UVG3、UVG2紫外線手電筒。現針對上海地區的終端客戶提供上門演示活動,如果有興趣了解瑞典蘭寶(labino)的紫外線產品,請和上海峰志儀器有限公司聯系。

PS135 HID紫外線探傷燈

瑞典蘭寶  BigBeam 電池型紫外線燈

蘭寶  BigBeam 紫外 Led 電池型紫外線燈是一款基于LED 技術而設計的電池操作紫外燈。蘭寶  BigBeam 紫外 Led 電池型紫外線燈發光二極管發出"均勻"分布的光束。蘭寶  BigBeam 紫外 Led 電池型紫外線燈是不含UV-B。二極管不發出白光。一體燈型更便于使用,即時開啟功能,功率即刻可達到zui大輸出。蘭寶  BigBeam 紫外 Led 電池型紫外線燈在距離380毫米處強度大約為3 500 μW/cm2。瑞典制造。


BB 2.0 Artemis (PN for AC (Mains) – L1078, PN for Battery – L1079): has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards. It generates an intensity of approximately 22 000 μw/cm2 at 38 cm (15 inches). The running time of the battery version is 5 hours. This is the most powerful handheld UV LED light in the world, especially designed for industries where high intensity is preferred, such as pipeline inspections. It is IP68 and is penetrant resistant.

The beam size generated above 1 000 μw/cm2 is approximately 10.25 inches / 26 cm. BB 2.0 Artemis is a RISK GROUP 3 as per IEC/EN 62471.


BB 2.0 Helios (PN for AC (Mains) – L1076, PN for Battery – L1077): has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards. It generates an intensity of approximately 9 000 μw/cm2 at 38 cm (15 inches). The running time of the battery version is 6 hours. It is IP68 and is penetrant resistant.

The beam size generated above 1 000 μw/cm2 is approximately 11 inches / 28 cm. BB 2.0 Helios is a RISK GROUP 3 as per IEC/EN 62471.


BB 2.0 Ikaros (PN for AC (Mains) – L1074, PN for Battery – L1075): has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards as well as with the internal requirements of all PRIMES listed on our website, including ROLLS-ROYCE RRES 90061 and AIRBUS AITM6-1001. It generates an intensity of approximately 4 000 μw/cm2 at 38 cm (15 inches). The running time of the battery version is 7 hours. It is IP68 and is penetrant resistant.

The beam size generated above 1 000 μw/cm2 is approximately 10.6 inches / 27 cm. BB 2.0 Ikaros is a RISK GROUP 3 as per IEC/EN 62471.

PS135 HID紫外線探傷燈

If you are looking instead for a stationery UV LED light with fixed installation please read about GX ORION. If you are looking for a more compact handheld UV LED light that can hold together an aerosol can, please read about MB 3.0 SERIES. If you are looking for a UV LED flashlight for quick inspections please read about UVG3 2.0 SERIES. If you are looking for a UV meter please consider a wireless meter, APOLLO 2.0. Don’t forget the unique measurement stand OLYMPOS which brings professionalism and standardization to your team.

瑞典蘭寶LABINO PS135 HID紫外線探傷燈

The Labino Compact lamp contains a trigger ballast (electronics) and a bulb in a single housing, making it easier for the operator to use and move around large inspection areas, it weighs 2.3 kg (5 lbs).

The Labino DUO is a two-part lamp consisting of a light weight luminary unit and a ballast (electronics) unit. The luminary unit weighs just 1.2 kg (2.6 lbs) and works best for time consuming and repetitive inspections within the same location. The ballast unit weighs 1.5 kg (3.3 lbs). This product is accompanied with two cords, a 3.0-meter (9.8 feet) cord that connects the luminary unit with the ballast unit and a 2.0-meter cord for the outlet.

Each lamp obtains full power in 5-15 seconds and can be switched on and off whenever used, without pre-cooling. 135 Series lamps have an ingress protection marking of IP65.

PS135紫外線探傷燈